Jeep 2014 Wrangler Operating Information Manual Download Page 194

Page: 194 / 676

Removing The Soft Top — Two-Door Models

1. Locate and remove the two boxes that contain the

following items:

•

Right and left door frames

•

Four door frame attachment knobs

•

Right and left quarter windows

•

Rear window

•

Two rear window roll up straps

•

Two Sunrider® secure straps (if equipped)

•

Two rear swing gate brackets

2. Remove the hard top. Refer to “Freedom Top™ Three-

Piece Modular Hard Top — Front/Rear Panel Re-
moval” in this section.

3. Remove the soft top bow assembly pivot bracket

screws (two per side) using a #T30 Torx® head driver.

4. Disconnect the knuckles from the left and right metal

pivot brackets. Remove the soft top from the vehicle
and store in a clean, dry location.

NOTE:

To aid in disconnecting the knuckles, you may

carefully tap on the knuckles using a rubber mallet.

192

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2014 Wrangler





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands

Jeep 2014 Wrangler, Operating Information Manual

Search results

Summary of Contents for 2014 Wrangler

Reviews:

Brands by name

Popular brands