91/116
230 V SYSTEM
(As far as possible) use electric appliances with double insulation or with three conductors
(Neutral-Live wire-Ground).
Connect the metallic covers or boxes of the electric appliances that are installed to the
protective conductor of the boat (green conductor with yellow stripes).
SHORE POWER SOCKET
In order to reduce the risks of electic shock and fire:
MAST HARNESS CONNECTION
Connect the mast harness after stepping the mast.
The harness is accessible at mast level (Access through the hatches).
The mast harness goes through the stanchion.
ELECTRONIC
Wire runs are available to complete the boat equipment.
Do not install electronic instruments or repeaters less than 1,50 m away from the radio
loudspeakers.
DANGER
Never let the end of the boat/shore supply cable hang in the water: The result may be an
electric field liable to hurt or kill the swimmers nearby.
There may be danger of electrocution if alternating current systems are incorrectly used.
RECOMMENDATION
- Before you plug in or unplug the boat/shore supply cable, switch off the shut off device
connected to the shore supply.
- Plug in the boat/shore supply cable in the boat before you plug it into the shore supply
socket.
- Unplug the boat/shore supply cable on shore first. Close the shore socket cover.
- Do not modify the connections of the boat/shore supply cable.
8
ELECTRICAL CIRCUITS
Summary of Contents for SUN ODYSSEY 36I
