PART NUMBER :
WR 534
WORX RACE SPONSONS
SEADOO 05 on all GTX, RXP, RXT
06 on GTI
IMPORTANT:
READ ALL INSTRUCTIONS BEFORE PROCEEDING WITH
INSTALLATION
Tools necessary for installation
: 1 x T30 Torx driver
1 x Tube of silicone
Red Loctite
Parts Supplied
: 2 x
Worx
adjustable Sponsons
2 x Worx Side rails
10 x 1 ¼” x 1/4”Round head bolts
10 x ¾”x ¼” Flat Washers
10 x 1¼” x ¼” Flat Washers
1.
Remove the OEM sponsons using the Torx screw driver, make sure that you
Clean all of the silicone from the hull surface because the Worx backing rails
Fit up flush to the hull surface.
2.
Apply a bead of silicone around edges of the backing rails and around each
mounting hole
3.
Fit the
WORX
side rails to hull using the 10 OEM screws and the QEM flat
washers.
4
Fit the
WORX
sponson blades using the 10 x 1”/1/4” round head bolts and the 10
large 1 ¼”x ¼” flat washers, use loctite on the bolts.
P.T.O. Continued:
