![background image](http://html1.mh-extra.com/html/jeanneau/sun-odyssey-36i/sun-odyssey-36i_owners-manual_3643276007.webp)
3/116
5.1.3, 5.2 ISO 10 240
The users of the boat are informed of the following:
- The entire crew must be trained properly.
- The boat shall not be loaded more with than the maximum load recommended by the
builder, in particular the total weight of the food supplies, of the different equipment that
are not supplied by the builder and of the persons on board. The weight of the boat
shall be properly distributed.
- The water in the bilge shall be kept at its minimum.
- The stability is reduced when you add weight in the upper parts.
- In case of heavy weather, the hatches, lockers and doors shall be closed in order to
minimize the risk of water coming in.
- The stability may be reduced when you tow a boat or when you lift heavy weights with
the davits or the boom.
- Breaking waves are a serious threat to stability.
- If your boat is equipped with a liferaft, carefully read the instructions. In the boat there
shall be all the proper safety equipment (harness, flares, liferaft etc.) depending on the
type of boat, the country, the weather
- The crew must be familiar with the use of all the safety equipment and the emergency
safety procedures (MOB, towing etc.).
- Anyone on the deck shall wear a life jacket or a buoyancy aid. Please note that in some
countries it is compulsory to wear an homologated buoyancy aid permanently.
- Some of the data is shown on the manufacturer's plate fixed to the boat. The
explanation of the data is given in the appropriate chapters of this manual.
Keep this manual in a safe place and hand it over to the new owner if you sell your boat.
You are advised to keep all the instructions and manuals provided by the boat equipment
manufacturers (accessories...) in the same place as this manual
Summary of Contents for SUN ODYSSEY 36I
