![background image](http://html1.mh-extra.com/html/jeanneau/sun-odyssey-36i/sun-odyssey-36i_owners-manual_3643276077.webp)
73/116
WATER TANK FILLING
In order to prevent any handling mistakes, never fill the water and fuel tanks at the same time.
During filling, avoid handling contaminants near the fillers.
Open and close the filler caps with the suitable key.
Check the filler cap seals for condition during filling.
The tanks are fitted with overflow outlets and vents.
Never insert the water filling hose deep down into the system in order to prevent any
over-pressure in the systems.
MAINTENANCE
Note: It may happen that the capacity of the fresh water tank or tanks indicated on the
page "Specifications" cannot be completely used depending on the trim and load of the
boat.
RECOMMENDATION
- Pay attention to the quality of the water for the filling up. Check if it is drinking water.
- It is possible to sterilize the tanks with a Clonazione tablet (sold at the Chemist's).
- If the boat is not used for long, purify the tanks and pipes with acetic acid (or white
vinegar).
- Inspection ports are provided on tanks and make possible the cleaning of the inside.
- Do not use chlorine-based products (they may spoil the quality of the pipework stainless
steel).
- For winter storage instructions and precautions, refer to Chapter 11.
7
PLUMBING
Summary of Contents for SUN ODYSSEY 36I
