Chapter 5
Wiring Tools
Wire Mapping
OneExpert DSL User’s Guide
48
22052280, Revision 001
April 2014
3
Select the
Toning
system key.
The Trace Toning screen appears.
4
To start toning the cable, select one of the following:
–
High
- sends a continuous high tone on all leads of the connected cable.
–
Low
- sends a continuous low tone on all leads of the connected cable.
–
Alternating 1
- sends a high tone follow by a low tone on all leads of the connected
cable.
–
Alternating 2
- sends a low tone followed by a short high tone on all leads of the
connected cable.
5
After you finish the test, select Off.
Summary of Contents for OneExpert DSL
Page 1: ...OneExpert DSL User s Guide...
Page 2: ......
Page 16: ...About this Guide Conventions OneExpert DSL User s Guide xiv 22052280 Rev 000 April 2014...
Page 119: ......
