Chapter 1
Introduction
Preparation for use
OneExpert DSL User’s Guide
April 2014
22052280, Revision 001
3
IP Data
•
Ethernet (Ping Tool)
•
IP ping testing (IPoE)
Home Wiring
•
Wire Map
•
Cable ID/Toner
•
Coax Map
•
HPNA
Copper
•
Multimeter
–
AC volts
–
DC volts
–
Resistance
•
TDR
•
Opens (distance) and capacitance
•
Balance
•
Load coil detect
•
POTS calls
Preparation for use
This section explains how to start using the OneExpert DSL.
When you unpack the OneExpert DSL, do the following:
•
Inspect the OneExpert DSL for damage.
•
If undamaged, save the box and packing materials in case you need to ship the
OneExpert DSL in the future.
•
Remove the protective film from the LCD. This film is in place for protection during shipment.
There is tab in the lower right corner for easy removal.
Before using the OneExpert DSL for the first time, do the following:
•
Turn the OneExpert DSL ON (use the green button on the front of the unit), and then verify
that it is operating properly by navigating through a few menus.
•
If the Batt. LED is red, charge the battery.
NOTE:
This handheld instrument is not intended to be body worn, or operated while held against the
body.
Summary of Contents for OneExpert DSL
Page 1: ...OneExpert DSL User s Guide...
Page 2: ......
Page 16: ...About this Guide Conventions OneExpert DSL User s Guide xiv 22052280 Rev 000 April 2014...
Page 119: ......
