JDS Technologies HomeRunner RBI, User Manual, Page: 37 / 39

37 HomeRunner RBI User Manual – Rev 1.03a
Controlling a Stargate-IP or CommStar-IP from H ome R unner RBI
HomeRunner RBI has built-in support for controlling a Stargate-IP (or CommStar-IP) via the Web
Xpander. Stargate commands can be triggered by a HomeRunner RBI button, scheduled event or
Then Macro.
To select a Stargate (or CommStar) command, click the
STARGATE button action. First check the
WebXpander Network Settings then click
“Test Connection”
to confirm the information is
correct for the Stargate’s Web Xpander you want to communicate with. Click “Transfer Labels”
to
import the Stargate labels into this window. These labels are only used as a reference for sending
commands to Stargate and will not replace your
HomeRunner RBI labels. This only needs to be done
once (and whenever you update Stargate labels).
If you want your
HomeRunner RBI to share the same defined labels as your Stargate for X-10
devices, Flags, Variables, and/or Timers, see Importing Defined Labels From Stargate-IP or
CommStar-IP .
Select the tab at the top for the type of command you want executed (X10, Flags, Variables, etc.).
Then select the specific device and command you want and click
OK .