17 HomeRunner RBI User Manual – Rev 1.03a
Defining Connected Devices
HomeRunner RBI
’s Device Database consists of two sections. The
Define Labels
section is used to
label all your X-10 devices, Flags, Variables and Timers. The
Define Insteon
section is used to
configure your Insteon network, Insteon lighting scenes and label all your Insteon devices.
If you are interfacing your
HomeRunner RBI
with a Stargate-IP or CommStar-IP, see
“
Importing
Defined Labels From Stargate-IP or CommStar-IP
.”
Define Labels (X-10, Flags, Variables, Timers)
To access the Define Labels window, click the
Define - Labels
button on the toolbar (or press
Ctrl+L
) or from within the Event Editor click
“Define”
then
“Define Labels.”
Select
“Show All
Devices”
toward the bottom of the window to list all 256 X-10 addresses. In the
“Name”
column,
type the name or location of each X-10 device you plan to use next to the corresponding address.
When finished, click “Show Named Devices” to display only the X-10 addresses you have named.
For X-10 devices that respond to All Lights On and All Lights Off commands, select
Yes
in the
All
Lts
column. When an All Lights On or All Lights Off command occurs,
HomeRunner RBI
will
display the proper X-10 status for those devices.