JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
4 - 1 0
Section 4
World Bill Acceptor (WBA®-1x/2x -SS & SS2)
Disassembly/Reassembly
3. Remove the single (1) locking pin below the
large gear (See Figure 4-36 b).
4. Remove the two (2) shaft securing E-rings
and the two (2) Bushings from the shaft
(See Figure 4-36 c).
5. Remove the Shaft Tension Spring set on the
small drive gears shaft end (see f inset) on
the shaft.(See Figure 4-36 d).
6. Separate the Cash Box side and remove the
two (2) Timing Belts (See Figure 4-37 a &
b).
The WBA Disassembly Procedure is now
complete. Reverse all of the proceeding
instructions to reassemble any of the components
described during this disassembly procedure.
a)
a)
c)
c)
b)
d)
a)
c)
Figure 4-36
Pusher Mechanism Gear Removal
a)
b)
Figure 4-37
Pusher Mechanism Belt Removal