No.G1-325-11-003
This manual describes how to use the SCA-12N200KS surge counter effectively and safely.
Please read before use.
Features
1) No power source or battery required.
2) Easy installation with the clamp-type CT (no need to cut the ground wire).
3) The CT format does not affect the ground wire (no discharge voltage is generated).
Notes on Safety
1) Do not apply strong vibration or impact as it may cause a failure.
2) The product does not function as an arrester.
3) Use the original lead provided to connect the CT unit.
4) Avoid proximity to strong magnetism as it may affect the operation of the counter.
Parts
Installation and Wiring
1) Mounting the body
(1) Mount the body using either a IEC rail (DIN rail) or fastening clamps with screw.
(2) Set the record switch to “00” if it does not read “00”
(Please refer to: The “Maintenance and Inspection of this Manual).
Manual
Surge Counter
SCA-12N200KS
E
1
3
2
COM
N.C
N.O
Surge Counter
SCA－12N200KS
MRASURRIG
RANGE
200A(8/20μs)
ACTUATION
COUNTER
＋
－
TEST TERMINAL
When DC24V is applide
to the terminal,count
is increased by 1
0
0
0 0
MADE IN JAPAN
ACTUATION
RECORD
CT
Test terminals
Actuation count
Record switch
Contact terminals
CT connection lead
φ 36mm
E
1
3
2
E
1
3
2
105
50
COM
N.C
N.O
COM
N.C
N.O
Surge Counter
SCA－12N200KS
MRASURRIG
RANGE
200A(8/20μs)
ACTUATION
COUNTER
＋
－
TEST TERMINAL
When DC24V is applide
to the terminal,count
is increased by 1
0
0
0 0
MADE IN JAPAN
ACTUATION
RECORD
Surge Counter
SCA－12N200KS
MRASURRIG
RANGE
200A(8/20μs)
ACTUATION
COUNTER
＋
－
TEST TERMINAL
When DC24V is applide
to the terminal,count
is increased by 1
0
0
0 0
MADE IN JAPAN
ACTUATION
RECORD
EIC rail (DIN rail) mounting slider
IEC rail (DIN rail)
Fastening clamp
（4-M4）
