JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
1 - 4
Section 1
World Bill Acceptor (WBA®-1x/2x-SS & SS2)
General Information
Specifications
Technical Specifications
Environmental Specifications
Electrical Specifications
Structural Specifications
Table 1-2
WBA-1x-SSx Technical Specification
Accepted Denominations:
Refer to the software specifications of each unit.
Bill Insertion:
Refer to the software specifications of each unit.
Acceptance Rate:
90% or greater (Including the 1st return and 2nd acceptance.*
*Note: The following bills types are excluded:
a) Bills with excessive or poor magnetism or unclear graphics
b) Double (dual) notes
c) Worn, dirty, wet, torn or excessively wrinkled bills
d) Bills having folded corners or edges
e) Bills having the wrong cut dimensions or printing displacement
f) When security measures against counterfeiting are implemented, the
software may not fulfill the specified acceptance rate level.
Validation Time:
Within 2 seconds (Time until the output of the vend signal).
Bill Types Accepted:
Width: 2.44 – 3.35 in. (62 – 85mm), Length: 4.72 – 6.5 in. (120 – 165mm
[up to 6.7 in. (170mm) with a Steel Cash Box])
Insertion Direction:
Refer to Software Specifications relative to bills being used
Processing Speed:
Approximately 2 seconds (from bill insertion to vend signal output)
Approximately 5 seconds (from bill insertion to completion of stacking)
Escrow:
One bill or one barcode coupon
Cash Box Type:
Security (lockable) box
*
*. The lock to be installed by the user (the catch is supplied with the unit.)
Cash Box Capacity:
Average 500 bills (Coupons)
Interface:
ID-003 bi-directional Serial Interface
Table 1-3
WBA-1x Environmental Specification
Operating Temperature:
32ºF to ~ 113ºF (0ºC to ~ +45ºC)
Storage Temperature:
- 4ºF to ~ 140ºF (-20ºC to ~ +60ºC)
Relative Operating Humidity:
30% to ~ 80% RH (non-condensed)
Relative Storage Humidity:
30% to ~ 86% RH (non-condensed)
Visible Light Sensitivity:
Avoid Direct Sunlight Contact
Installation:
Indoors Only
Table 1-4
WBA-1x Electrical Specification
Supply Voltage:
12VDC ± 5%
(NOTE: Use a power supply with a 2.5A or more capability).
Current Consumption:
Standby = 2.8VA
Operation = 14VA (Max = 24VA)
Table 1-5
WBA-1x Structural Specification
Unit Weight:
Approximately 10.582 lbs (~4.8kg)
Cash Box Weight
Approximately 3.307 lbs (~1.5kg empty)
Mounting:
Horizontal
Outer Dimensions:
11.96 in (303.8mm) High x 8.86 in (225mm) Deep x 4.49 in (114mm)
Wide
