CHAPTER 2
Operations and Maintenance
2 - 15
6-2
Settings of DIP Switch 2
This DIP switch is used to select the acceptor’s operations with or without SD3 stacker.
This switch is also used to specify whether to enable or disable the optional key switch of the SD3
stacker.
<Example 1> EBA-30/31/34/35
(Remarks) 1) Make sure to set DIP Switch 2 prior to power-up.
Any changes in settings after power-up is invalid.
2) For operation without stacker, set Switch #1 OFF. The unit does not operate properly in
inappropriate settings.
3) Key switch is the optional part to be installed on SD3 stacker during factory assembly.
For the units without key switch, set Switch #2 OFF.
The unit does not operate properly in inappropriate settings.
OFF
1
2
3
4
5
6
7
8
[RESERVED]
Key Switch ON/OFF
Enabled
Disabled (for operation w/o SD3 stacker, set this switch to OFF).
Switch #2
ON
OFF
Operation with/without SD3 stacker
With SD3 stacker
Without SD3 stacker
Switch #1
ON
OFF
ON
