7 - 22
CHAPTER 7
Downloading software to Flash Memory
Downloading....File=Eur503.com, Address=0007FFC2. Packet=246
Downloading Data --->
Downloading Data --->
Downloading Data --->
Downloading Data --->
Downloading Data --->
Downloading Data --->
Downloading Data --->
Downloading Data --->
Download End and Confirm --->
Poll
--->
<---Prog.
Check
Verified-V3173:M3173
(a)
(b)
Dev.=f0 Port1 File=xxxx.xxx VCF420:00C00000:00C7FFFF CRC3173 38400bps RUN
DOWN LOAD PROGRM Ver.214-00 05/JUN/'03 JCM
I:Addressed Reset
V:Version Information Request
G:Global
Reset
Ctrl-X:Abort
F:File Download
P:Program Check Verify
S:Set Start Addr. & Seed Val.
Ctrl-f:File Download (Section) (Start Addr,:000000 Seed Val.:0000)
Device Ver.:
Validator Status:
(3)
Downloading:
1)
Press [Shift]-F (capital letter) to start downloading the program.
2)
Downloading starts. Both red and green LEDs of CPU board blink alternately.
3)
When the downloading is complete, LEDs blink in unison.
4)
"CRC" appears on the monitor (See Fig-44).
Fig-44
(a) V****: CRC value calculated by EBA
(b) M****: CRC value calculated by PC
If the downloading is successful, CRC values of (a) and (b) should be the same.
5)
After the downloading is complete, press [Shift]-V (capital letter) to verify the update if neces-
sary.
6)
Exit the program ([Ctrl]-x).
Reference:"CRC" is an error correction method for checking whether or not data is correctly transmit-
ted.
