2 - 16
CHAPTER 2
Operations and Maintenance
(Example 2)
EBA-32/33
(Remarks) 1) Make sure to set DIP switch 2 before power-up.
Any changes in settings after power-up is invalid.
2) For operation without stacker, set Switch #1 OFF. The unit does not operate properly in
inappropriate settings.
3) Key switch is the optional part to be installed on SD3 stacker during factory assembly.
For the units without key switch, set Switch #2 OFF.
The unit does not operate properly in inappropriate settings.
4) Switch #3 is the selector of ID-0E3 Encryption / Non-encryption mode.
For communication in non-encryption mode, set Switch #3 to OFF. The unit does not
operate properly in inappropriate settings.
ON
OFF
1
2
3
4
5
6
7
8
[RESERVED]
ID-0E3 Encryption mode ON/OFF
Non-encryption mode
Encryption mode
Switch #3
ON
OFF
Key Switch ON/OFF
Enabled
Disabled (for operation w/o SD3 stacker, set this switch to OFF).
Switch #2
ON
OFF
Operation with/without SD3 stacker
With SD3 stacker
Without SD3 stacker
Switch #1
ON
OFF
