JCG AC836 1200M DUAL BAND GIGABIT ROUTER
20
/
78
Host Name-
Enter a host name for your router. Some ISPs may require this
information. This allows some users who get IP address automatically from their ISP.
For most users, this is not required.
Max. Transmission Unit-
The normal value for most Ethernet networks is 1500
Bytes. It is not recommended that you change the default MTU Size unless required
by your ISP.
Static DNS-
If your ISP gives you one or two DNS addresses, enable
“Static DNS”
and enter the primary and secondary addresses into the correct fields. Otherwise,
disable the feature and the DNS servers will be assigned dynamically from your ISP.
Click the
“Save/Apply”
button to save and apply your settings.
6.2.3 PPPoE (DSL, PON)
If your ISP provides a PPPoE connection, select
PPPoE (DSL, PON)
option.
User Name/Password/Confirmed Password-
Enter the User Name and Password
provided by your ISP. These fields are case-sensitive.
Max. Transmission Unit-
The normal value for most Ethernet networks is 1492 Bytes.
It is not recommended that you change the default MTU Size unless required by
your ISP.
No PPP Loopback Detection-
With loopback detection feature enabled, the router
can detect loops using loopback detection packets.
Service Name (Optional)-
Enter the Service Name provided by your ISP.
Static DNS-
If your ISP gives you one or two DNS addresses, enable
“Static DNS”
and enter the primary and secondary addresses into the correct fields. Otherwise,
disable the feature and the DNS servers will be assigned dynamically from your ISP.
