JCG AC836 1200M DUAL BAND GIGABIT ROUTER
46
/
78
Current Time-
The default time set on the router.
Time Zone-
Select your local time zone from the drop-down list.
NTP Server-
Enter the address or domain of the NTP and then the router will get
the time from the NTP Server preferentially.
NTP Sync. Interval-
Synchronization scheduler to synchronize your clock
automatically. The default interval for this process is 2 hours, choose your desired
interval from the drop-down list.
➢
To synchronize the time with your computer:
1.
Click
“Sync. With Host”
button.
2.
Select your local time zone.
3.
Click “
Save”
.
➢
To set time manually:
1.
Enter the Date in Year-Month-Day format.
2.
Enter time in Hour-Minute format.
3.
Click
“Sync. Immediately”
to apply the settings.
4.
Select your local time zone.
5.
Click “
Save”
.
➢
To set time automatically:
1.
Select your local time zone.
2.
Enter the address or domain of the NTP Server.
3.
Select
“NTP Sync. Interval”
.
4.
Click “
Save/Apply”
.
Note:
1. This setting will be used for some time-based functions such as signal, firewall. You
must specify your time zone once login to the router successfully; otherwise, these
functions will not take effect.
2. The time will be lost if the router is turned off.
Chapter 14 Advanced
There are 5 submenus under the
“Advanced”
:
Networl
,
NAT, Firewall, Management
and
Status
. Click any of them to configure the corresponding functions.
14.1
Network
Choose menu
“Advanced
→
Network”
to create an IPv6 internet connection and set up
static routing.
