Section C - Electrics
Service Procedures
Wiring Harness Repair
C-28
C-28
9803/9390-2
readily visible. They are secured using the
corresponding size and matching colour-coded jaws
of the crimp tool to ensure joint security. This tool also
incorporates a ratchet closing mechanism which will
not release until the splice is fully closed to the correct
compression size.
3
With the Butane heater assembly, seal the
connection.
K
Fig 18. (
T
C-28)
.
a
Remove the cap
19-A
from the end of the
disposable gas cartridge
19-B
.
Fig 18.
b
Before assembling the gas cartridge to the
reflector element
20-C
, turn the red ring
20-D
to
the left, (in the direction of the minus sign marked
on the ring).
Fig 19.
c
Position the tube hanging down from inside the
reflector assembly into the hole at the top of the
gas cartridge. Then press the gas cartridge up
into the reflector assembly as far as possible until
the two elements are clasped firmly together.
K
Fig 20. (
T
C-28)
. A click will be heard.
Fig 20.
d
Turn the small ring
21-E
so that the air holes at
21-
F
are completely closed.
Fig 21.
e
Turn the red ring
22-D
to the right (in the direction
of the plus sign) in order to turn on the gas.
Important: Before turning the heater on, make sure that
the cartridge is not hotter than the reflector element. This
may occur if the cartridge is held in the hand for a long
time. The temperature difference between the cartridge
and the reflector element may cause long yellow flames to
appear on ignition.
Summary of Contents for Groundhog 6x4
