![background image](http://html1.mh-extra.com/html/jb-systems/ledcon-xl/ledcon-xl_operation-manual_636371006.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
4/8
LEDCON-XL
7. [UNIT ID] BUTTON:
this button is used to set the DMX configuration for each Unit
8. INFORMATION DISPLAY
9. [UNIT] BUTTONS:
used to activate or deactivate the unit (group)
10. [FIXED COLOR
– CHASES] BUTTONS:
These buttons have different functions, depending on the
selected working mode:
[FIXED COLORS] MODE:
You can select 9 different predefined colors.
[CHASE 2]:
You can select 8 different chases and a random chase. (sound activated or not)
11. [MODE SELECT] BUTTONS:
3 buttons used to set the controller in different working modes:
[FIXED COLORS]:
select this mode if you want to use the “fixed color” buttons (10).
[CHASE MODE]:
used to select two different chase modes:
[CHASE 1]:
select this mode if you want to select one of the 12 color chases using the
[chase 1 / spectrum mix] fader (12). In [Chase1] mode the yellow LED is lit. All projectors will
change into the same color at the same time
[CHASE 2]:
select this mode if you want to use the controller as a 4 or 8 channel DJ light
modulator. You can use the [ fixed colors
– chases] buttons” (10) to select the different
chase programs. In [Chase2] mode the yellow LED blinks.
[SPECTRUM MIX]:
select this mode if you want to select one of the 32 different colors using the
[chase 1 / spectrum mix] fader (12).
12. [CHASE 1
–SPECTRUM MIX] FADER:
used to select one of the available color chases:
Left side of the fader indicates the different chases.
The right side of the fader indicates the different colors.
Important remark:
There’s also a function called
“color fade”
which is very nice
for “background
lighting” applications. Select this function to fade gently from one color to another. You can adjust
the fade-over time with the color-fade fader(13).
13. [SPEED/FADE] FADER:
used to select the chase speed or color fade time:
Left side of the fader indicates the chase speed, ranging from 2,5s to 0,1s.
In “fixed color” mode you can adjust the fade-over time between 2 colors from 2,5s to 0,1s.
Right side of the fader indicates the color fade time, ranging from 12s to 2,5s.
14. [MASTER] FADER:
used to control the overall dimming of the LEDs.
15. [STROBE] FADER:
used to control the strobe function and strobe speed
16. [BLACKOUT] BUTTON:
used to set all the colors at zero level.
17. [FULL ON] FLASH BUTTON:
used to set all the colors at maximum level.
18. [UV] BUTTON:
us
ed to activate the UV function of projectors that include UV LED’s (like 6-in-1
projectors). The projectors will react in a different way, depending of the mode they are in:
In [FIXED COLORS] mode: only the UV effect will be on, all other colors will go out.
In [CHASE] and [Spectrum mix] mode: All UV leds will be always on while the normal color
programs keep on running.
19. [SOUND TO CHASE] BUTTON:
used to toggle the chase mode between sound controlled mode and
static mode.
IMPORTANT: SOUND SENSITIVITY
: it is possible to adjust the sensitivity of the microphone that
will control the sound chase programs.
Select the CHASE 1 or CHASE 2 mode
Press the [SOUND TO CHASE] button for about 3 seconds, till the green SOUND TO CHASE
LED starts blinking
[Sound ..] (sound followed by 2 numbers) will appear on the display. This is the sound sensitivity
of the microphone.
Now you can use the [STROBE] fader to adjust the sensitivity to your needs (depending on how
loud you will play your music). You can read the value on the display.
When you have found the right setting, press the [SOUND TO CHASE] button again for about 3
seconds to exit this sound adjustment mode
This new value is now stored in your unit