ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
3/8
LEDCON-XL
FUNCTIONS EXTRA FADER SECTION
1. CHANNEL FADERS:
can be used for different purposes, depending on the working mode:
[Manual] mode:
change the output level of the channel.
[Scene] mode:
progressively recalls the scene that was programmed under this fader.
2. FLASH BUTTONS:
can be used for different purposes, depending on the working mode:
[Manual] mode:
used as channel FLASH button (max. output as long as the button is pressed)
[Scene] mode:
CHANNEL fader closed
switch the programmed scene on/off.
CHANNEL fader not closed
used as scene FLASH button. (set scene at 100%)
3. STATUS LED:
information depends on the working mode:
[Manual] mode:
lights up progressively, depending on the fader position.
[Scene] mode:
dark while no scene is programmed (empty).
lit while a scene is programmed but not active.
blinking while a scene is programmed and active (shown on the output)
4. [SCENE/MANUAL] BUTTON:
used to toggle between manual mode and scene mode:
[Manual] mode:
each of the 16 CHANNEL faders can be used to manually set the output level.
[Scene] mode:
each of the 16 CHANNEL faders can contain a scene, scenes can be mixed
manually.
5. [PROGRAM] BUTTON:
used to program a scene under one of the CHANNEL faders. While pressed
together with the [SCENE/MANUAL] button (4), you can set the controller in [PROGRAM] mode. For
more information on using the [PROGRAM] button, see
chapter “HOW TO SETUP”.
6. [BLACKOUT] BUTTON:
used to shutoff the DMX-output of the Fader section.
FUNCTIONS LED PROJECTOR SECTION
