background image

ENGLISH 

 

OPERATION MANUAL 

 

 
JB SYSTEMS

®

 

8/8 

LEDCON-XL 

ADDRESSING THE CONNECTED UNITS 

Each time you build a different installation with the LEDCON-02 MK2, you should check the DMX addresses 
of the connected projectors.  

1.  MANUAL ADDRESSING for the units of the FADER SECTION: 

 Fader 1 = DMX address 093 

 Fader 2 = DMX address 094 

 Fader 3 = DMX address 095 

 Fader 4 = DMX address 096 

 Fader 5 = DMX address 097 

 Fader 6 = DMX address 098 

 Fader 7 = DMX address 099 

 Fader 8 = DMX address 100 

 

2.  MANUAL ADDRESSING for the units of the LED PROJECTOR SECTION: 

Set the DMX start addresses corresponding to the channel mode you have selected. 

4CH MODE: 

 [Unit 1] = address 001 

 [Unit 2] = address 009 

 [Unit 3] = address 017 

 [Unit 4] = address 025 

8CH MODE: 

 [Unit 1] = address 001 

 [Unit 2] = address 009 

 [Unit 3] = address 017 

 [Unit 4] = address 025 

 [Unit 5] = address 033  

 [Unit 6] = address 041  

 [Unit 7] = address 049 

 [Unit 8] = address 057  

 

3.  MANUAL ADDRESSING for the use with an EXTRA EXTERNAL DMX CONTROLLER: 

You  can  connect  an  extra  DMX  controller  to  the  DMX  input  of  the  LEDCON-XL  if  you  want  to  control 
more fixtures via the same DMX line. 
To don’t interfere with the commands of the LEDCON-XL, 100 channels will automatically be added to 
the channels coming from the external controller. 

 

EXTERNAL CONTROLLER output                  LEDCON 

–XL output 

DMX channel = 001              

              DMX channel = 101 

DMX channel = 002              

              DMX channel = 102 

DMX channel = 003              

              DMX channel = 103 

DMX channel = 004              

              DMX channel = 104 

Etc. 

DMX channel = 412              

              DMX channel = 512 

 

SPECIFICATIONS 

This unit is radio-interference suppressed. This product meets the requirements of the current European and 
national guidelines. Conformity has been established and the relevant statements and documents have been 
deposited by the manufacturer. 

Power Input: 

DC 9V to 12V, 300mA minimum. 

AC/DC Power adapter:

 

AC 230V, 50Hz 

 9Vdc to 12V / 300mA (or more) 

DMX output: 

3pin XLR  

DMX input: 

3pin XLR  

Audio input:

 

RCA or internal microphone 

Size:

 

482 x 133 x 75 mm  

Weight:

 

2.2 kg 

 

The information is subject to change without prior notice. You can download the latest version of 

this user manual on our website: www.jb-systems.eu 

Summary of Contents for LEDCON XL













Reviews: