Specifications
Connector Specifications
GNSS Board Details
86
www.javad.com
RS422 and CAN Connector
The RS422/CAN connector is a sealed receptacle, M12, 8 pin Male receptacle, FM, M16x1.5,
flying lead connector Binder-USA p/n 09-3481-700-08 (Figure A-5)
Figure A-5. RS422 and CAN Connector
Table A-7 gives the RS422/CAN connector specification.
Table A-7. RS422/CAN Specification
GNSS External Antenna RF Connector
The external antenna connector type is a TNC RF connector with an Applied Engineering Product
p/n
6001-7051-003
. RF input from LNA, 100 mA at 5.0 volts DC output.
EVENT and 1PPS Connectors (Optional)
The EVENT and 1PPS connectors are coaxial female receptacles of BNC series, Kings
Electronics part number KC-79-108. These connectors are optional.
1
7
2
3
4
5
6
8
Number
Signal Name
Dir
Details
1
PWR IN
P
Bus power
2
GND
-
Signal ground
3
O
Port TX+ line
4
422_TX-
O
Port TX- line
5
I
Port RX+ line
6
422_RX-
I
Port RX- line
7
CAN_H
I/O
CAN_H bus line (dominant high)
8
CAN_L
I/O
CAN_H bus line (dominant low)
