Configuration
TriPad Configuration
How to Work with DELTAD-G2/G2D
44
www.javad.com
• Show the status of post-processing mode (static or dynamic) when performing a Post-
Processing Kinematic measuring with the help of FN button (REC LED).
You use TriVU to configure TriPad settings. Refer to the TriVU Software Manual for all possible
TriPad configurations.
1. Connect your receiver and computer. See “Connecting the Receiver and a Computer” on
page 25 for this procedure.
2. Start TriVU. Select the COM port and click Ok (Figure 3-1).
Figure 3-15. Connection Parameters
3. Click the Configuration
Receiver and open the MinPad tab. Set the following parameters
and click Apply. See the following pages for descriptions of these parameters.
• Recording interval on page 45.
• Elevation mask for log file on page 45.
• File name prefix on page 45.
• Always append to the file on page 46.
• Files Creation mode on page 46.
• Automatic File Rotation Mode (AFRM) on page 46.
