Configuration
Configuring the Receiver
31
www.javad.com
• load a new OAF and other configuration files to a receiver
• load new firmware
The following Base and Rover configurations are recommended for the most common
applications. However, you can select configuration parameters as needed for your particular
jobsite.
Note:
Do not make other changes without consulting the TriVU Software Manual.
1. Connect the receiver and computer as described in “Connecting the Receiver and a
Computer” on page 25.
2. Start TriVU. Select the COM port and click Ok (Figure 3-1).
Figure 3-1. Connection Parameters
3. Click Configuration
Receiver.
Note:
Click Apply after making any configuration change; otherwise, the receiver will not register the
change.
