Receiver and File Maintenance
Checking Firmware Version
Using TriVU to Clear NVRAM
65
www.javad.com
4. Click OK at the clear NVRAM confirmation dialog box. The REC LED rapidly flashes
green and red; the SAT LED flashes red.
The receiver will automatically disconnect once the NVRAM is cleared.
5.6. Checking Firmware Version
Use TriVU to check the firmware version of your receiver.
1. Connect your receiver and computer. See “Connecting the Receiver and a Computer” on
page 25 for this procedure.
2. Start TriVU. Select the COM port and click Ok (Figure 5-7).
Figure 5-12. Connection Parameters
3. Click on Help
About TriVU (Figure 5-13).
Figure 5-13. Help->About