Instruction Manual T601
JAQUET AG
Revision: 004
66/73
B: Possible Problems
Neither green nor yellow LAN connector LED light up
Cause:
No physical (electrical) connection present.
Solution:
Check that a LAN Crossover cable is being used.
Cause:
Tachometer is unpowered.
Solution:
Check the supply connections and level.
Cause:
Computer network card is switched off or de-activated (energy save mode)
Solution:
•
Open the Network Connections window.
<Start>
<Settings>
<Control Panel>
<Network Connections>
•
Click on the appropriate connection
•
Open the Menu <File>
•
Select <Deactivate>
•
Re-open Menu <File>
•
Select <Activate>
Yellow LAN connector LED lights but no connection to browser
Cause:
Several instruments are connected to the same LAN as the tachometer.
Solution:
The tachometer only functions with a <Pier to Pier> connection. Remove the other
equipment and insure that no hub, switch or router is connected between tachometer and
computer.
Cause:
Computer LAN card not set correctly.
Solution:
Configure the card in accordance with chapter 7 Configuration via PC Software. If that does
not solve the problem check that the network card is configured as follows:
Go to Desktop, Settings, Network connections
and right click on <Properties>. Right click on the
network card you want to use and select
<Properties>.
