16
800-DI14 module
www.janitza.de
3.8 Scope of delivery
Quantity Part. no.
Designation
1
52.31.214. 800-DI14 module
(digital input module)
1
52.31.206 1TE module bus connector
1
33.03.886
Installation instructions (DE/EN)
"Digital input module for the
UMG 801"
1
33.03.342 "Safety information” supplement
(12 languages)
Tab. Scope of delivery for 800-DI14 digital input module
INFORMATION
·The modules are delivered with the necessary
screw terminals and bus connectors (JanBus in-
terface) for connection to the basic device or other
modules.
·All supplied options and design variants are de-
scribed on the delivery note.
·The GridVis
®
network analysis software is available
at www.janitza.de and can be used to configure
your basic device with modules and read out data
for analysis (prerequisite: PC connection to your
basic device).
3.9 Accessories
Quantity
Part. no.
Designation
1
10.01.953 End bracket
Tab. Accessories
3.10 Operating concept
Options to configure the basic device with digital
input module or to read measured values:
·Display and buttons on the basic device (user
interface).
·GridVis
®
network analysis software.
·RS-485 interface or Ethernet interface.
The modules can be used to realize meter and mod-
ule topologies with a flexible arrangement of the DIN
rails. For the operation of the devices, components
and modules integrated in your meter and module
topology, please refer to the respective additional
usage information.
INFORMATION
Please refer to the user manual of the UMG 801
basic device for the operation, configuration and
readout of expansion modules.
This user manual describes the 800-DI14 module
and provides information on the operation of the
module via the basic device (UMG 801).
The GridVis
®
software has an online help with tutori-
als.
A list of parameters and Modbus addresses with
data on your basic device with module is available
for you as a download at www.janitza.de.
3.11 GridVis
®
network analysis software
With the GridVis
®
software, you have the perfect tool
for programming, reading out and visualizing mea-
surement data (download at www.janitza.de).
Performance characteristics of the GridVis
®
soft-
ware
·Configuration of the basic device and the modules
of your meter and module topology.
·Graphic display of measured values.
·Online help and tutorials.
Connections to the PC (GridVis
®
software)
Information on connections for communication
between the PC and the basic device (with modules)
can be found in the usage information of the basic
device.
