30
800-DI14 module
www.janitza.de
7. Operation, display and button functions
7.1 Basic device with 800-DI14 module
The basic device with module has a display and 6
function buttons to enable installation, commission-
ing and configuration without a PC.
INFORMATION
·The configuration of your module and the display of
module-relevant measurement data is carried out
via the basic device.
·For details and information on the display and but-
ton functions of the basic device, refer to the usage
information of the basic device.
·The
GridVis
®
network analysis software is available
at www.janitza.de and can be used to configure
your basic device with modules and read out data
for analysis (prerequisite: PC connection to your
basic device).
7.2 Module-relevant menu items of the basic
device with one 800-DI14 module
INFORMATION
·The following illustration shows module-relevant
menu items of the basic device with
one 800-DI14
module
. A detailed presentation of the menu items
can be found in the UMG 801 user manual.
·The module-relevant items of the basic device can
contain up to 10 modules!
Home (start screen UMG 801,
1st Measuring display)
Phasor diagram
Voltage
Current
Power
Energy
Multifunction channels
Digital I/O status
Basic device
Modules
1st
module
nth module (up to 10 modules)
Configuration
Diagnostics
Identify all modules
Duration
Confirm
Identify one module
Module position
Duration
Confirm
System Information
Basic device
Serial
number
MAC
IP
address
Date
HW
version
SW
version
SW
build
1. Module
Type
Serial
number
Position
HW
version
SW
version
SW
build
nth module (up to 10 modules)
Menu
