28
800-DI14 module
www.janitza.de
UMG 801 with 800-DI14 module
6. Module communication / PC connection
6.1 Module communication
Configure your digital input modules via the display
and the buttons on your basic device (UMG 801).
The basic device connected to your module or mod-
ule series uses the integrated
Ethernet interface
for
communication with a PC.
To configure or read out the basic device with mod-
ule or with your module series, the PC must have the
GridVis
®
software installed.
Another option to configure modules or read out
measured values is available via the device homep-
age of the UMG 801.
6.2 PC connection of the UMG 801 basic device
with digital input module or your module
series via the Ethernet interface
Connection to a DHCP server and PC.
The DHCP server automatically assigns IP addresses
to the basic device with module(s) and to the PC.
DHCP
server
PC with GridVis
®
Patch cable
Patch cable
UMG 801 with 800-DI14 module
PC with GridVis
®
Patch cable
6.3 PC direct connection of the UMG 801 basic
device with digital input module or your
module series via the Ethernet interface
The PC and basic device require a fixed IP address.
INFORMATION
Further information on module communication and
configuration via the PC connection of the basic
device and via the Ethernet interfaces can be found
in the UMG 801 user manual.
Switch/
Router
Fig.: Example: PC connection with DHCP server and PC
Fig. Example: PC direct connection
INFORMATION
The figures described are examples! When combined
with the UMG 801 as a basic device, there are nu-
merous topology variants for devices and modules.
Please refer to the usage information for the basic
device and the modules of your devices and module
topology.
