janitza 14.02.001, User Manual And Technical Data

Page: 69 / 86

www.janitza.com UMG 804
69
14.4.4 Voltage Phase
·The Voltage Phase Assignment assigns a voltage
phase (L1, L2, L3) to each channel in the event
non-sequential panel type or receptacle types are
being used.
·
The default is L1-L2-L3 in sequential order.
·To determine which channel corresponds to
which circuit see the channel to circuit relation
table as this is dependent on Smart Port Confi-
guration.
·The
Set Default
button returns the system to the
L1, L2, L3 sequential values.
·To determine which channel corresponds to
which circuit see the channel to circuit relation
table as this is dependent on Panel Maps Confi-
guration.
INFORMATION
Important : Always remember to select
the
Save Settings
button to save chan-
ges to settings.