janitza 14.02.001, User Manual And Technical Data, Page: 39 / 86

www.janitza.com UMG 804
39
9. DIN Rail CT Interface Card
(CTC24CV)
9.1 Overview
·DIN Rail CT Interface Cards are oriented ac-
cording to the panelboard type and numbering
scheme in one of the four configurations shown.
·Sequential configuration is used for the DIN Rail
CT Interface Card. All the CT terminals will equal
the channel number for the HTML display for
their respective Smart Ports.
·In Top Feed and Bottom Feed orientations the
panelboard type and numbering is identical
however the user can select to install the Inter-
face Card with the Smart Port (RJ45 connector)
top facing (Top Feed) or bottom facing (Bottom
Feed).
·Ensure that the connections to the UMG 804
Smart Ports match those shown on the orienta-
tion diagrams.
·Smart Ports hosting the Interface Card must be
correctly set in the HTML console under Con-
figuration>General Settings. Refer to chapter
„16.4.1 General Settings“ on page 65.