UMG 804
www.janitza.com
58
Setting Alarm Thresholds
·Alarm thresholds can be set on the
Detail Data
page
under the
Data Menu
.
·Voltage thresholds are set using the
Update Set-
tings
button under the Voltage Alarm.
·Selecting the
Voltage Alarm
Update Settings
button will
reveal a menu for the high
(upper) voltage threshold as
well as low voltage thres-
hold. The time delay for the
respective thresholds will
determine the duration the
state must be true to activate
the alarm.
·Selecting the
Current Alarm
Update Settings
button will
reveal a menu for the high (up-
per) current threshold as well
as low current threshold. The
time delay for the respective
thresholds will determine the
duration the state must be true
to activate the alarm. Current
thresholds are based on a per-
centage of the breaker rating
which is set under the Configu-
ration > Breaker Size page.
INFORMATION
Setting any threshold to “0” will disable the alarm.
It is suggested that the low current threshold be
disabled unless there is a specific requirement.
Summary of Contents for 14.02.001
