janitza 14.02.001, User Manual And Technical Data

Page: 73 / 86

www.janitza.com UMG 804
73
Configuring Virtual Meters
·To create a Virtual Meter go to the “configuration”
tab on the HTML interface and select “Virtual
Meter”.
·Using the Virtual Meter mapping template provi-
de a common Virtual Meter number “1-96” for all
the channels that are to be grouped to form the
Virtual Meter.
·Note that Virtual Meters and True Meters use the
same register maps and numbering allocation
(1-96) so Virtual Meters must not use any number
allocated to a True Meter. It is best to use high
numbers such as 94-95-96 for Virtual Meters to
ensure there is no conflict with True Meters.
·Refer to the Configuration Tables at the end of
this document to determine the correct channels
to group as this will vary with the configuration
setting.
·In this example all circuits are grouped
to virtual meter “96” creating a total for
the for the entire panelboard and elimi-
nating the need for main input current
transformers