12
Dimmer Operation
Operating Manual
HUB24 Series Dimmer
4.2.12
Display Contrast (4-1-3)
Menu
4 System Settings
4-1 Display
4-1-3 Contrast
The contrast of the LCD display can be changed to suit the required viewing angle.
•
Select “4-1-3 Contrast” on the menu.
•
Turn the encoder wheel to change the contrast level (1 is light, 16 is dark).
•
Press OK to save the new contrast and exit.
4.2.13
Main Display (4-1-4)
Menu
4 System Settings
4-1 Display
4-1-4 Main Display
The information that is shown on the main screen can be configured. The options are
Normal, Mains Monitor and Custom Logo. See appendix A for how to create and
edit custom logos on a PC (or Laptop) and see section 4.4 for how to download them
to the HUB24.
The owner’s logo and/or contact details can be shown on the LCD at the main screen.
The logo can be password protected so it can’t be overwritten by somebody hiring the
unit.
•
Select “4-1-4 Main Display” on the menu.
•
Turn the encoder wheel to highlight either “Normal”, “Mains Monitor” or
“Custom Logo”.
•
Press OK to save the new main display setting and exit.
4.2.14
Playback Mode (4-2)
Menu
4 System Settings
4-2 Playback Mode
When playing back snapshots and chases the HUB24 can also continue to respond to
the incoming DMX signal. How the playback and DMX signal are merged together
can be configured. “Override” ignores the DMX signal, while “HTP” does highest
takes precedence for the level of each channel.
•
Select “4-2 Playback Mode” on the menu.
•
Turn the encoder wheel to highlight either “Override” or “HTP”.
•
Press OK to save the new playback mode and exit.
4.2.15
Restore Defaults (4-3)
Menu
4 System Settings
4-3 Restore Defaults
•
Select “4-3 Restore Defaults” on the menu.
•
Press CONFIRM to restore the following settings back to their default values:
−
DMX Terminate to Off.
−
DMX Loss of signal to Hold.
−
Control Curve to Linear for all channels.
−
Current Limit to 32 Amps.
−
Fault Detect to Detect Faults.