16
Dimmer Operation
Operating Manual
HUB24 Series Dimmer
4.2.25
Record a Snapshot (6-1)
Menu
6 Record
6-1 Snapshot
The HUB24 can record up to 8 snapshots, which can be played back later. A snapshot
is a grab of the drive level of all 15 dimmer outputs.
•
Set the dimmer outputs to the desired levels, using a combination of lighting
console, playback other snapshots or test build outputs.
•
Select “6-1 Snapshot” on the menu.
•
Turn the encoder wheel to highlight the desired snapshot memory.
•
Press RECORD to save the current drive level of all 15 outputs into the selected
snapshot memory.
4.2.26
Record a Chase (6-2-#-1)
Menu
6 Record
6-2 Chase
6-2-# Chase #
6-2-#-1 Record Step
The HUB24 can record up to 8 chases, which can be played back later. Each chase
can have from 1 to 15 steps. Each step is a grab of the drive level of all 15 outputs.
•
Select “6-2 Chase” on the menu.
•
Turn the encoder wheel to highlight the desired chase and press SELECT.
•
Ensure “Record Step” is highlighted and press SELECT.
•
Set the dimmer outputs to the desired levels, using a lighting console.
•
Ensure “New Step” is highlighted and press RECORD to save the current drive
level of all 15 outputs into the new step.
•
Repeat the previous 2 actions for all the required steps of the chase.
To record a chase without a console, record each step of the chase in a similar way as
recording a snapshot.
4.2.27
Chase Parameters (6-2-#-2)
Menu
6 Record
6-2 Chase
6-2-# Chase #
6-2-#-2 Parameters
Level, speed and crossfade parameters, that effect the way a chase is played back, are
stored within the chase. The value of these parameters can be changed at anytime,
even while the chase is being played back.
Level:
master level of the chase, 0 to 100% (default 100).
Speed:
speed of the chase, 0 = slow, 255 = fast (default 180).
Crossfade: fading rate between steps, 0 = gradual, 100 = immediate (default 50).
