Jands Event 4 User Manual Download Page 63

Page: 63 / 78

Software Version 5.0

25/11/02

Draft Page

17.1.6

The Setup Desk Display Submenu

Various display fetures can be changed from this submenu. Press

Setup

, open the

Desk

submenu and then open the

Display

submenu.

Set LCDs Lamp Video
Disp +to| 15 On

17.1.7

The Setup Desk Display LCDs Submenu – Adjusting the

LCDs

The two LCDs located on the front panel of the Event 4 can be configured to suit
different lighting conditions and viewing angles.

From

the

Display

submenu, open the

LCDs

submenu to set the LCD displays

Set Time Brightness Contr1 Contr2
LCD 5min 3 8 8

Time

Sets the period of inactivity before the LCD backlighting turns off to
preserve the life of the displays. Can be set from 0 – 59 minutes

Bright

Sets the backlight level of all LCDs.

is the lowest level and provides

minimal backlight.

is the maximum backlight level

Contr1

Sets the contrast of the left Assign master LCD. Can be set from 0 to 15
Higher contrast settings tend to make the LCDs more legible from a
lower viewing angle

Contr2

Sets the contrast of the right Assign master LCD. (Event 416)
Sets the contrast of all Programmer LCD. (Event 408)

Contr3

Sets the contrast of all Programmer LCD. (Event 416)

17.1.8

The Setup Desk Lamp Submenu – Adjusting the Desklight

level

The Event 4 can be fitted with optional gooseneck type desklights. The brightness of
the lights can be set in the Setup Desk Lamp submenu.

Press

Setup

, open the

Desk

submenu and open the

Display

submenu and move

the cursor to the

Lamp

field.

Set LCDs Lamp Video
Disp +to| 15 On

Lamp

Sets the desklight intensity.

is the lowest level and

is the maximum

desklight level

17.1.9

The Setup Desk Video Submenu – Turning the VDU On or Off

The Event 4 can be fitted with optional SVGA type monitor.

Press

Setup

, open the

Desk

submenu, open the

Display

submenu, and move the

cursor to the

Video

field.

Summary of Contents for Event 4















































































Search results

Summary of Contents for Event 4

Reviews:

Related manuals for Event 4

Brands by name

Popular brands

Jands Event 4, User Manual

Search results

Summary of Contents for Event 4

Reviews:

Related manuals for Event 4

Brands by name

Popular brands