JANDS – Event 4 Version 5 Users Manual
Page 40
Revision 5.0.0.5
25/11/02
10.5 Editing a Memory
A memory can be edited by first selecting the memory and then using the Faders and
Programmer controls to make changes.
10.5.1
Selecting the Memory to Edit
There are two ways to open a memory for editing. Either:
1.
Press the
Edit
button.
2.
Press the flash button beneath the Assign fader controlling the item to be
edited.
or
1.
Press the
Edit
button.
2.
Press the
Mem
ory button. Enter the Memory number (000.00 – 999.99) to be
edited.
10.5.2
The Edit Memory Confirm Menu
The Edit Memory Confirm menu is used to set the state of the programmer when
editing.
Edit labl Prog Confirm Mask
M999.99 labl Merge Off ----
Prog
This field can be set to either
Clear
the programmer and load the
memory contents or to
Merge
the memory with any selections currently
in the programmer.
Mask
Masks any or all of Intensity, Focus, Colour and Beam when loaded to
the Programmer. For example loading a Memory set to
--C-
will
prevent the memory colour information being loaded to the programmer.
All fixtures, active in the memory, will be set to white.
Confirm
When all other fields have been set, move the cursor to the Confirm field
and press the
+ (On)
button to begin editing.
10.5.3
The Edit Memory Menu
The Edit Memory menu is used to set Fader levels and Record options.
Edit labl Fdr To At Record Save As
M999.99 labl 120 122 50 Prog M999.99
Fdr
Sets the first fader number of a range.
To
Sets the last fader number of a range.
At
Sets the intensity of the fader(s).
Record
Sets which console controls will be included while editing.
All
records
from the Programmer and the Presets.
Prog
records from the
Programmer only.
Preset
records from the Preset Faders only.
