JANDS – Event 4 Version 5 Users Manual
Page 54
Revision 5.0.0.5
25/11/02
14.3 Edit
File
14.3.1
Changing the Default File Settings
It is possible to change the way Files work using the Edit File menu.
The Edit File menu is used to limit the number of Assign Masters that will be loaded
when a new File is loaded.
Note:
When a File is saved ALL the settings of the Assign Masters are saved. Edit
File is only used to limit the number of Assign faders that are updated by loading a
File.
1.
Press the
Edit
button then press the
File
button.
2.
With the cursor in the
First
field, set the number of the first Assign Master
fader of the group that will be loaded with the contents of a File.
3.
Move the cursor to the
Last
field, set the number of the last Assign Master
fader of the group that will be loaded with the contents of a File.
4.
Press the
Exit
key
Example:
The operator might want to use the first six memories stored in a file. However, when
this file is loaded to the Assign Masters, the remaining 10 Assign Masters are not to
be changed. Set the FIRST field to 1 and the LAST field to 6.
14.3.2
Restoring the Factory Settings for File
To restore the default settings for Edit File:
1.
Press the
Edit
button then press the
File
button.
2.
Move the cursor to the
Restore
field.
3.
Press the
+ (On)
button.
4.
Press the
Exit
key.
14.3.3
Labelling a File
Files can be labelled, in the File menu, to allow easy identification of their contents.
Labels only display in the File Info screen on an optional external monitor.
