Jamar RAC-100, Manual

Page: 33 / 56

Memory Clear
This feature allows you to clear all memory locations that have been stored
in the RAC-200. Note that when using this feature all memory locations are
cleared. To clear the memory, use the following steps:
Step 1 The RAC-200 must be in COUNT HOLD to clear the memory.
Once this is done, press the ERSE key and [ErASE] will be
displayed.
Step 2 Press the ENTER key while [ErASE] is displayed. The display
will step through all of the memory locations (0-999), which
takes about eleven seconds. When completed, ALL memory lo-
cations will be erased and the display will return to Count Hold.
If after pressing the ERSE key you decide against clearing the memory lo-
cations, do not press the ENTER key, just press any other key. An error code
[E 0] will appear, you will exit the MEMORY CLEAR function and the
DMI will return to its normal operating state.
4-11
Chapter 4 — Key Functions & Operating Procedures