![background image](http://html1.mh-extra.com/html/jai/rmc-673/rmc-673_user-manual_631421077.webp)
Appendix 77
RMC-675/RMC-673
8.3.96
White Balance Mode
Function
Command String
Camera Response
Set White Balance Mode
:WBM=[D]<cr> :o<cr>
Set the advanced color processing white balance mode to
manual or auto. [D] is the mode parameter. This feature only
applies to the RMC-673 and RMC-675 models.
0 = Manual.
1 = Auto.
Get White Balance
:WBM?<cr> :oWBM[D]<cr>
Enquire current advanced color processing white balance
mode. [D] is the mode parameter. This feature only applies
to the RMC-673 and RMC-675 models.
0 = Manual.
1 = Auto.
8.3.97
Window Display
Function
Command String
Camera Response
Set Window Display State
:WDS=[D]<cr> :o<cr>
Turns the display of the window for ALC control on and off.
[D] is the state value. This command applies to camera
models TM-770, RMC-673, and RMC-675.
0 = ALC window display off.
1 = ALC window display on.
Get Window Display State
:WDS?<cr> :oWDS[D]<cr>
Enquire current state of the ALC Window display. [D] is the
current state. This command applies to camera models TM-
770, RMC-673, and RMC-675.
0 = ALC window display off.
1 = ALC window display on.
8.3.98
Window Size Control (Obsolete in firmware 1.60 – replaced by WDS)
Note: This function has been replaced by the Window Display command (WDS) beginning in
firmware version 1.60.)
Function
Command String
Camera Response
Set Window Size
:WSZ=[D]<cr> :o<cr>
Set the window size for ALC control. [D] is the size parameter.
This command applies to camera models TM-770, RMC-673, and
RMC-675.
0 = Center window.
1 = Full window.
Get Window Size
:WSZ?<cr> :oWSZ[D]<cr>
Enquire current window size for ALC control. [D] is the current
size value. This command applies to camera models TM-770,
RMC-673, and RMC-675.
0 = Center window.
1 = Full window.
Summary of Contents for RMC-673
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration...
Page 81: ......