![background image](http://html1.mh-extra.com/html/jai/rmc-673/rmc-673_user-manual_631421025.webp)
Software Introduction & Installation25
RMC-675/RMC-673
Figure 17.
A shortcut provides easy access to the RMC-675/RMC-673 software.
4.2
Using the RMC-675/RMC-673 Software
You must connect a camera via an RS-232 cable to the computer and power it up before starting the camera
control software.
Start the RMC-675/RMC-673 software by clicking on the Start menu, and then selecting JAI_RMC-675/RMC-673
and clicking the JAI RMC-675/RMC-673 shortcut on the right (Figure 18).
4.2.1
The Main Screen
The main screen offers several menus. Click on File in the menu bar to access the following:
Figure 18.
Main Screen File Menu
4.2.1.1
Preferences
Selecting Preferences opens a separate window that allows the user to set the COM port the camera will use to
interface with the computer. Set the port number by selecting it in the COM Port drop down list box. The system
defaults to the COM port number where the camera is attached.
In addition, this window allows you to rename the Control functions of "Zoom", "Focus", and "Iris". Thus, the
controls can be used for more general purpose functions, such as stepper motors for "Pan" and "Tilt".
Figure 19.
Set the COM Port
Summary of Contents for RMC-673
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration...
Page 81: ......