![background image](http://html1.mh-extra.com/html/jai/rmc-673/rmc-673_user-manual_631421066.webp)
RMC-675/RMC-673
66
Appendix
8.3.57
Color Coefficient – Blue 2
Function
Command String
Camera Response
Set Color Coefficient B2
:KB2=[DDDD]<cr> :o<cr>
Set the color correction coefficient for Blue 2 (B2). This is the
blue component of the 2
nd
row of a 9 element color correction
matrix. [DDDD] is the coefficient value with a range of 256 -
4085 counts. The user range for the coefficient value is 0.25 –
3.99.
Therefore there are 1024 counts per coefficient unit.
Get Color Coefficient B2
:KB2?<cr> :oKB2[DDDD]<cr>
Enquire current color correction coefficient for Blue 2 (B2).
This is the blue component of the 2
nd
row of a 9 element color
correction matrix. [DDDD] is the coefficient value with a range
of 256 - 4085 counts. The user range for the coefficient value
is 0.25 – 3.99.
Therefore there are 1024 counts per
coefficient unit.
8.3.58
Color Coefficient – Blue 3
Function
Command String
Camera Response
Set Color Coefficient B3
:KB3=[DDDD]<cr> :o<cr>
Set the color correction coefficient for Blue 3 (B3). This is the
blue component of the 3
rd
row of a 9 element color correction
matrix. [DDDD] is the coefficient value with a range of 256 -
4085 counts. The user range for the coefficient value is 0.25 –
3.99.
Therefore there are 1024 counts per coefficient unit.
Get Color Coefficient B3
:KB3?<cr> :oKB3[DDDD]<cr>
Enquire current color correction coefficient for Blue 3 (B3).
This is the blue component of the 3
rd
row of a 9 element color
correction matrix. [DDDD] is the coefficient value with a range
of 256 - 4085 counts. The user range for the coefficient value
is 0.25 – 3.99.
Therefore there are 1024 counts per
coefficient unit.
8.3.59
Log Average Weighting
Function
Command String
Camera Response
Set Log Average Wt
:LAW=[DD]<cr> :o<cr>
Set the LAW value (log average weighting for ALC). [DD] is the
level value with a range of 1-100. This command applies only
to camera models TM-770.
Get Log Average Wt
:LAW?<cr> :oLAW[DD]<cr>
Enquire current LAW value (log average weighting for ALC).
[DD] is the current value with a range of 1-100. This command
applies only to camera models TM-770.
8.3.60
Locate Blemishes
Function
Command String
Camera Response
Locate Blemishes
:LDF!<cr> :o<cr>
This command causes the camera to run an internal process to
locate any pixels that can cause blemishes in the image. The
number of blemishes identified can be queried with the BCT
command.
Summary of Contents for RMC-673
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration...
Page 81: ......