Software Introduction & Installation21
RMC-675/RMC-673
RMC-675/RMC-673 Camera Control Software
4
Software Introduction
The RMC-675/RMC-673 are supported by a software control tool that opens the RS-232 serial port (COM). This
document addresses the JAI RMC-675/RMC-673 camera software available for download at www.jai.com.
4.1
Software Installation
Following are instructions to install the RMC-675/RMC-673 camera software on a PC.
4.1.1
Before Installing the Camera-Control Software
Before installing the camera control software, please note the following.
•
The RMC-675/RMC-673 camera control software is tested for Microsoft Windows 2000 and XP operating
systems.
•
We recommend that you use small fonts for the Display Properties dialog box in the control panel.
•
The RMC-675/RMC-673 camera control software requires one free communication port that is not in
conflict with other peripherals such as the mouse or modem.
4.1.2
Installing the Software
To install the RMC-675/RMC-673 camera control software, follow the steps below.
1.
Download the RMC-675/RMC-673 software from the JAI, Inc. web site at www.jai.com.
2.
Locate the software by going to the camera description (RMC-675 or RMC-673) and clicking on the
Software link, or by searching using the site search feature.
3.
Click on the “Save” button to save a compressed copy of the software to the hard drive of your system.
Note: If you go to software and download based on the camera description, for example, RMC-675, the
software download is the correct, and latest released version.
Figure 9.
Use Save to download a copy of the software.
The software is compressed; use decompression software to create the installation directory.
Summary of Contents for RMC-673
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration...
Page 81: ......
