![background image](http://html1.mh-extra.com/html/jai/rmc-673/rmc-673_user-manual_631421058.webp)
RMC-675/RMC-673
58
Appendix
8.3.28
Color Intensity - Red
Function
Command String
Camera Response
Get Red Intensity
:CIR?<cr> :oCGR[DDDD]<cr>
Enquire current red color intensity. [DDDD] is the current
intensity value with a range of 1-4184394.
8.3.29
CID Customer ID String
Function
Command String
Camera Response
Set User-defined ID String
:CID=[XXX..]<cr> :o<cr>
Set the user-defined ID string in the camera’s EEPOM memory.
[XXX…] specified up to 16 ASCII characters that are the user-
defined ID string.
Note: This feature applies to the TM-770, TM-773, and TM-
775.
Get User-defined ID String
:CID?<cr> :o
[XXX….]<cr>
Enquire the current user-defined ID string value in the
camera’s EEPROM memory. [XXX…]
Note: This feature applies
to the TM-770, TM-773, and TM-775.
8.3.30
Color Mode
Function
Command String
Camera Response
Set Color Mode
:CMD=[D]<cr> :o<cr>
Set camera mode to mono or color. [D] is the mode value.
0 = Mono mode.
1 = Color mode.
Get Color Mode
:CMD?<cr> :oCMD[D]<cr>
Enquire current color mode. [D] is the current mode value.
0 = Mono mode.
1 = Color mode.
8.3.31
Defect Correction
Function
Command String
Camera Response
Set Defect Correction
:DFC=[D]<cr> :o<cr>
Turn Defect Correction on/off. [D] is the state value.
0 = Defect correction off.
1 = Defect correction on .
Get Defect Correction
:DFC?<cr> :oDFC[D]<cr>
Enquire current Defect Correction state. [D] is the current
state value.
0 = Defect correction off.
1 = Defect correction on.
Summary of Contents for RMC-673
Page 2: ......
Page 13: ...Hardware Introduction 13 RMC 675 RMC 673 Figure 1 RMC 675 RMC 673 System Configuration...
Page 81: ......