— 30 —
GO-5101M-PMCL / GO-5101C-PMCL
■
Horizontal timing
㩷
㩷
Tap Geometry
CL Pixel
Clock (MHz)
Line
BlankingClock
[A]
LineValid clock
[B]
Total Line clock
[C]
Total Line Period
(usec) [C]
Line Rate (KHz)
[C]
1X2-1Y
(Full)
37.125
4
1232
1236
33.293
30.036
74.25
4
1232
1236
16.646
60.073
84.85
8
1232
1240
14.613
68.433
1X3-1Y
(Full)
37.125
6
820
826
22.249
44.946
74.25
176
820
996
13.414
74.548
1X4-1Y
(Full)
37.125
4
616
620
16.700
59.879
74.25
380
616
996
13.414
74.548
Trigger Control
The camera allows Frame Start trigger controls to be performed via external trigger signals.
The Frame Start trigger allows exposure control via the trigger signal inputs.
The settings for exposure control and triggers are related to each other. Be sure to configure the settings
described in “Configuring Exposure and External Trigger Settings” (page 17).
Shortest Repetition Period for Triggers
The reciprocal of the maximum frame rate is the time required to output one frame. The shortest
repetition periods for triggers cannot be lower than that value.
■
When [Exposure Mode] is [Timed]
Example: When [Trigger Source] is set to [Line 7 - CC1]
•
Trigger overlap: Off
FVAL
Readout duration
Next trigger disabled
Next trigger
input enabled
Sensor
Exposure
Trigger
(= Height x Line Period)
EEN
A
B
t1
