JAI GO-5101C-PMCL, User Manual

Page: 54 / 60

— 54 —
GO-5101M-PMCL / GO-5101C-PMCL
Specifications
Item GO-5101M-PMCL GO-5101C-PMCL
Scanning system Progressive scan, 1 tap
Synchronization Internal
Interface CameraLink (Version 2.0)
Image sensor Monochrome CMOS Bayer color CMOS
Image size (effective image) 8.5 (H) × 7.09 (V), 11.1 mm diagonal
Pixel size 3.45 (H) × 3.45 (V) µm
Effective image pixel output 2464 (H) × 2056 (V) 2464 (H) × 2056 (V)
Frame Rate
(max.) Tap Geometry CL Pixel
Clock [MHz] — —
Base 1X2-1Y 37.125 14.3 fps 14.3 fps
74.25 28.7 fps 28.7 fps
84.85 32.7 fps 32.7 fps
1X3-1Y 37.125 21.5 fps 21.5 fps
74.25 35.6 fps 35.6 fps
Medium 1X4-1Y 37.125 28.6 fps 28.6 fps
74.25 35.6 fps 35.6 fps
EMVA 1288 parameters
Absolute sensitivit
Maximum SN ratio At 10-bit output
3.54p (
λ
= 525 nm)
40.26 dB
At 10-bit output
3.94p (
λ
= 525 nm)
40.26 dB
SN ratio (traditional method) 60 dB or more (typical)
(0 dB gain, Black)
60 dB or more (typical)
Dark compression ON: 50 dB
(typical)
(0 dB gain, Green Black)
Digital image
output format Full pixel 2464 (H) × 2056 (V) Bayer 2464 (H) × 2056 (V)
ROI Width 96 to 2464, 16 pixels/step 96 to 2464, 16 pixels/step
Offset X 0 to 2448, 16 pixels/step 0 to 2448, 16 pixels/step
Height 2 to 2056, 2 line/step 2 to 2056, 2 lines/step
Offset Y 0 to 2054, 2 lines/step 0 to 2054, 2 lines/step
Binning H 1 2464 (H) 2464 (H)
2 1232 (H) —
V 1 2056 (V) 2056(V)
2 1028 (V) —
Pixel Format Mono8, Mono10, Mono12 BayerRG8, BayerRG10,
BayerRG12
Trigger
selector Exposure Frame Start
Exposure modes Off, Timed (EPS), Trigger Width (PWC)
Trigger overlap Off/Readout
Trigger input signals Line4 - TTL In, Line7 - CC1, Software, PG0, NAND Out 0/1,
Low, High, User Output 0/1
Exposure
modes Timed 14 µs (min) to 8 s (max), variable unit: 1 µs
Trigger Width 14 µs (min) to 8 s (max)
Auto exposure (Exposure Auto) Off, Continuous
Auto exposure response speed
(AGC/ASC Control Speed) 1 to 8
Video Send Mode Selector Normal ROI, Trigger Sequencer,
Command Sequencer
Digital I/O Line Selector (4P): GPIO IN / GPIO OUT
Black level
adjustment Default level 33LSB (during 10-bit output)
Video level adjustment range 0 to 100 (during 10-bit output)
Adjustment range –33LSB to +64LSB against reference level (during 10-bit output)
Resolution adjustment 1 STEP = 0.25LSB