JAI GO-5101C-PMCL Page 20 User Manual Download

Page: 20 / 60

— 20 —

GO-5101M-PMCL / GO-5101C-PMCL

Adjusting the Gain

Adjust the sensitivity via the analog gain (i.e., master gain).



For details on gain control, see “Gain Control” (page 33) in the “Main Functions” section.

■

Manual adjustment

Expand [Analog Control], and set [Gain Auto] to [Off].

([Off] is the default setting.)

Configure the gain.

Expand [Analog Control], and select the gain you want to configure in [Gain Selector].

• For the GO-5101M-PMCL, only [Analog All] (master gain) can be configured.

• For the GO-5101C-PMCL, [Analog All] (master gain), [Digital Red] (digital R gain), and

[Digital Blue] (digital B gain) can be configured individually.

Configure the gain value in [Gain].

• [Analog All] (master gain) can be set to multiple (x1 to x16) of Analog Gain. The resolution is

set in x0.01 steps (0.005 dB to 0.08 dB depending on the setting value). Values are
configured by multipliers. For example, the values set for x1 and x16 are 100 and 1600
respectively.

• For the GO-5101C-PMCL, the [Digital Red] (digital R gain) and [Digital Blue] (digital B gain)

can be set to a value from x0.45 to x5.62 (–7 dB to +15 dB) the [Digital All] (master gain)
value. The resolution is set in x0.01 dB steps.

Adjusting the White Balance (GO-5101C-PMCL only)

Adjust the white balance using R and B gain. The white balance can also be adjusted automatically.

■

Manual white balance adjustment

Expand [Analog Control], and set [Balance White Auto] to [Off].

([Off] is the default setting.)

Select the gain to configure in [Gain Selector], and set the gain value in [Gain].

■

Automatic white balance adjustment

Place a white sheet of paper or similar object under the same lighting conditions as the

intended subject, and zoom in to capture the white.

White objects near the subject, such as a white cloth or wall, can also be used.

Be sure to prevent the high-intensity spot lights from entering the screen.

Select the [Balance White Auto] tab, and click [Continuous] or [Once] depending on your

intended application.

The white balance is automatically adjusted.

Summary of Contents for GO-5101C-PMCL





























































Search results

Summary of Contents for GO-5101C-PMCL

Reviews:

Related manuals for GO-5101C-PMCL

Brands by name

Popular brands

JAI GO-5101C-PMCL, User Manual

Search results

Summary of Contents for GO-5101C-PMCL

Reviews:

Related manuals for GO-5101C-PMCL

Brands by name

Popular brands