— 16 —
GO-5101M-PMCL / GO-5101C-PMCL
Configuring the Output Format
Configure the size, position, and pixel format of the images to be acquired.
The factory settings are as follows. Change the settings as necessary.
Factory default values
Item
Default value
Image Format Control
Width
2464 (pixels)
Height
2056 (pixels)
Offset X (horizontal position)
0 (pixels)
Offset Y (vertical position)
0 (pixels)
Pixel Format
GO-5101M-PMCL: Mono8
GO-5101C-PMCL: BayerRG8
You can specify the image acquisition area. For details, see “ROI (Regional Scanning Function)” (page 38).
1
Select the [Feature Properties] tab, and select the item you want to configure under [Image
Format Control].
when a configurable item is selected.
Note
Settings can only be changed when image acquisition on the camera is stopped. If an item is grayed out and
does not appear even when you select it, click
(Stop Acquisition) to stop image acquisition.
2
Click
and change the setting value.
Example: When changing [Width]
