GO-2400M-PMCL-1 | GO-2400C-PMCL-1 | User Manual (Ver. 1.0)
Main Functions
- 38 -
Camera Output Format (Tap Geometry)
This camera supports a variety of output formats.
The following tap geometries are supported.
The settings on the frame grabber board must be configured to match the tap geometry setting on the
camera. For details configuring frame grabber board settings, refer to the operating instructions for
each board.
Tap Geometry
CL Configuration
Video Process Bypass Mode
"Off"
Video Process Bypass Mode
"On"
1X1 - 1Y*
Base
bit: 8/10
bit : 8/10/12
1X2 - 1Y
Base
bit: 8/10
bit: 8/10/12
1X3 - 1Y
Base
bit: 8
bit: 8
1X3 - 1Y
Medium
bit: 10
bit: 10/12
1X4 - 1Y
Medium
bit: 8/10
bit: 8/10/12
1X8 - 1Y
Full
bit: 8
bit: 8
1X8 - 1Y
80 bit
bit: 10
bit: 10
Note:
*When the pixel format is RGB8, RGB10, or RGB12, the output format can only be
configured when Tap Geometry is 1X1-1Y. Tap Geometry (1X1-1Y) cannot be used with pixel
formats other than RGB8, RGB10, and RGB12.
