GO-2400M-PMCL-1 | GO-2400C-PMCL-1 | User Manual (Ver. 1.0)
Main Functions
- 37 -
Valid Input/Output Combinations
The following signals can be used as sources for each output destination (Trigger Selector, Line
Selector, Pulse Generator Selector). You can also connect two different sources to NAND paths in the
GPIO and reuse the signal generated there as a source for a different selector.
The combinations of source signals and output destinations are indicated in the following.
Source signal
(Cross point
switch input)
Signals to use as
output
Output Destination - Selector (Cross point switch output)
Trigger Selector
Line Selector
Pulse
Generator
Selector
Acquisition
Start
Acquisition
Stop
Frame
Start
Transfer
Start
Line2
OPT
Out 1
Line3
OPT
Out 2
Time
Stamp
Reset
NAND
0 In 1
NAND
0 In 2
NAND
1 In 1
NAND
1 In 2
Pulse
Generator 0
LOW
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
HIGH
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Line4 TTL In
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Line7 CC1
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
NAND 0 Out
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
NAND 1 Out
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Pulse Generator 0
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
User Output 0
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
User Output 1
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Software Trigger
✓
✓
✓
✓
✓
Action 1
✓
✓
✓
✓
✓
Action 2
✓
✓
✓
✓
✓
FVAL
✓
✓
✓
✓
✓
✓
✓
✓
LVAL
✓
✓
✓
✓
✓
✓
✓
Exposure Active
✓
✓
✓
✓
✓
✓
✓
✓
Frame Trigger Wait
✓
✓
✓
✓
✓
✓
✓
✓
Frame Active
✓
✓
✓
✓
✓
✓
✓
✓
Acquisition Trigger
Wait
✓
✓
✓
✓
✓
✓
✓
✓
Trigger Source
Line Source
Pulse
Generator
Clear Source
Use
Indicates default values for each selector.
“
Configure Exposure and External Trigger Settings
” shows the default values for Frame Start.
✓
Supported
(Empty) Not Supported
